The EB30CSRT-AM is an electrical emSFP Encoder/Decoder (Transceiver) module designed to encode/decode video composite signals over 75Ω coaxial cables via DIN 1.0/2.3 connectors. On the receive channel, the module decodes NTSCPAL composite input and convert to SD-SDI signal. On the transmit channel, the module encodes the SD-SDI signal to NTSCPAL composite.

The EB30CSRT-AM provides module identification information and diagnostic monitoring through a Two-Wire serial interface. It is also hot-pluggable solution for in field system upgrade and maintenance.

The EB30CSRT-AM is interchangeable with any others MSA pinout optical video SFP or coaxial emSFP module improving high product flexibility. The emSFP form factor provides quick time-to-market and reduced development effort and cost. The EB30CSRT-AM is Pb-free and RoHS compliant.


  • SMPTE 259M-C compliant
  • DIN 1.0/2.3 75Ω connectors
  • Supported Composite Standards:
    • NTSC M, NTSC J, NTSC 4.43
    • PAL B/G/H/I/D, PAL M, PAL N, PAL 60
  • Rx Channel:
    • 10-bit Composite to SD-SDI video decoder
    • 4x oversampling (54MHz)
    • Test Pattern generation
  • Tx Channel:
    • 10-bit SD-SDI to Composite video encoder
    • Up to 16x oversampling (216MHz)
    • Multiple Chroma & Luma filters
    • Test Pattern generation
  • InputOutput Test Pattern Generator
  • Hot-pluggable
  • Control via serial interface including:
    • Voltage & Temperature Monitoring
    • Module Information
    • Analog Status and Control registers
  • Power Consumption – typical 1100 mW
  • Single Supply +3.3V
  • Pb-free and RoHS compliant
  • Operating temperature range: 0°C to 65°C
  • 5mm x 13.4mm x 8.6mm SFP Package
  • Ganged Cages & Stacked Cages mounting supported


  • Routers
  • Composite Video Monitoring
  • Security Control and Monitoring